Spring Grove, Illinois
Spring Grove concrete contractor for driveways, patios and walks
A local crew for new and replacement driveways, patios, service walks and slabs. Spring Grove permits all of it, inspects the stone before the concrete, and publishes exactly what it expects underneath.
Spring Grove lies west of Antioch, by the Chain O'Lakes. Its Building Department writes its requirements down plainly, so a slab can be planned to the Village's numbers from the first site visit rather than corrected at inspection.
What we pour for Spring Grove homes
- Concrete driveways, first-time or replacing asphalt or worn concrete.
- Concrete patios and service walks.
- Concrete repair for a failed section or a broken approach.
- Garage and shed slabs, and the pad a trailer or boat will sit on.
The spec the Village publishes
Spring Grove's June 2025 handout for driveways, patios and walkways sets the build-up for each, and the code chapter behind it says the same:
- Concrete driveway: four inches of compacted stone, then five inches of concrete. Chapter 14 adds the detail: air-entrained, six-bag mix, with 6 x 6 #10 welded wire reinforcing.
- Patio or service walk: four inches of compacted stone and four inches of concrete.
- Paver patio: a six-inch compacted base.
So a driveway bid that says four inches of concrete is short of what Spring Grove asks for. A useful question for every bidder is whether their number includes the base, the fifth inch and the mesh.
Three inspections, three days a week
A replacement driveway needs a building permit here, named as such on the Building Department's own list. Once it is issued, the job is inspected three times:
- Base inspection, before concrete, asphalt or pavers go down.
- Curb inspection, before any curb is cut.
- Final inspection, once the work is complete.
Inspectors come out on Monday, Wednesday and Friday, 7:30am to 2:00pm, and the call has to reach the Village before 3:30pm the day before. Because the stone has to pass before any concrete arrives, the pour date follows that inspection calendar.
What the application asks for
- The Miscellaneous Permit Application, with the scope of work.
- A copy of your septic plan, marked with the new driveway, patio or walk and its distances from the property lines.
- A detailed drawing, and a letter from your homeowners' association if you have one.
The handout quotes a $65 minimum permit fee, more for bigger scopes or extra inspections, notes that a $500 road bond may be required, and allows three to five business days for issue. Work must start within six months and finish within a year.
Since July 1, 2025 every contractor working in the Village must also be registered with it, and the registration form lists driveways among the work it covers.
Width, culverts and a figure that does not match
Both Village documents require ten feet of green space between the driveway and the side lot line. On maximum width they differ: Chapter 14 allows 30 feet at the street for a single-family driveway, while the 2025 handout says 25 feet at the approach. We do not pick one for the Village. Ask the Building Department which it applies before designing a wide apron.
Where a ditch needs carrying under the drive, section 1442 wants a culvert extending at least three feet past each side, with flared ends of the same material. Metal and clay pipe are prohibited, and the size comes from calculations rather than habit. A curb cut or a change to an existing one is reviewed case by case on the driveway permit form.
Which code the Village enforces
Section 1403 of Chapter 14, revised by Ord. 2025-04, adopts the 2021 International Residential Code for homes, alongside the 2021 International Building Code and the 2020 National Electrical Code. The chapter as published is dated June 17, 2025, and section 1404.2 points to the Village's own IRC amendments in Appendix A. The same edition carries through the chapter: section 1417.3, revised by Ord. 2024-30, sets plumbing standards by the 2014 Illinois Plumbing Code and the 2021 IRC as amended.
For a slab on grade, the working rules are the local driveway spec above. The code edition matters more for a garage or an addition, where footings and frost protection come into play. Either way, confirm the current edition with the Building Department when the permit goes in, since codes are revised.
From first call to final inspection
1. The short version first
What you want poured and roughly how big. Mention a septic field if there is one.
2. Measure, draw, apply
The drawing and septic plan markup go in with the application, sized to the Village spec.
3. Base, pour, final
Stone down and inspected, then concrete, then the final sign-off, inside the Village's working hours.
Background reading
- concrete or asphalt for a driveway
- concrete, pavers or a deck for the patio
- where the joints go on a patio
A free quote for your Spring Grove slab
Four short questions start it. A local crew then visits, measures, and prices to the five-inch spec the Village publishes.
Sources
- Village of Spring Grove Municipal Code, Chapter 14, Buildings (revised June 17, 2025) - section 1403 adopting the 2021 International Residential Code (Ord. 2025-04), and sections 1439, 1439.1, 1441 and 1442 on driveway surfacing, width, green space and culverts. Read 2026-09-28.
- Village of Spring Grove, Driveway Permit Application and Driveways/Patios/Walkways handout (revised June 19, 2025) - application contents including the septic plan, permit fee and road bond, timing, base and slab thicknesses, width at the approach, curb cuts, the three inspections, inspection days and construction hours. Read 2026-09-28.
- Village of Spring Grove, Building Department - replacement driveways listed as needing a permit, and contractor registration required from July 1, 2025. Read 2026-09-28.
Get a Free Quote
Get your free, on-site quote.
Tell us about your project and we'll call you back the same day to set up a free measure and price.